Asus AAEON VPC-5620S User Manual Download

Page: 52 / 130

Chapter 3

–

AMI BIOS Setup

str

ial &
Mo
bile

NVR

VPC
-5620S

3.2 AMI BIOS Setup

The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic

system configurations, which is stored in the battery-backed CMOS RAM and BIOS

NVRAM so that the information is retained when the power is turned off.

To enter BIOS Setup, press <Del> or <F2> immediately while your computer is

powering up.

The function for each interface can be found below.

Main

–

Date and time can be set here. Press <Tab> to switch between date elements

Advanced

–

Access and configure advanced processor options and features.

Chipset

–

Chipset and host bridge options and features

Security

–

The setup administrator password can be set here

Boot

–

Set boot options including boot priority and Quiet Boot option

Save & Exit

–

Save your changes and exit the program

Summary of Contents for AAEON VPC-5620S



































































































































Search results

Summary of Contents for AAEON VPC-5620S

Reviews:

Related manuals for AAEON VPC-5620S

Brands by name

Popular brands

Asus AAEON VPC-5620S, User Manual

Search results

Summary of Contents for AAEON VPC-5620S

Reviews:

Related manuals for AAEON VPC-5620S

Brands by name

Popular brands