Asus Aaeon VPC-3350S User Manual Download Page 46

Page: 46 / 88

Chapter 3 – AMI BIOS Setup

Mob

ile

NV
R

VPC
-3350
S

3.2 AMI BIOS Setup

The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic

system configurations, which is stored in the battery-backed CMOS RAM and BIOS

NVRAM so that the information is retained when the power is turned off.

To enter BIOS Setup, power on the system and immediately press <Del> or <Esc>.

The function for each interface can be found below.

Main – Date and time can be set here.

Advanced – Configure major system features (CPU, Super IO, Hardware Monitor, etc.)

Chipset – Configure chipset features.

Security – The BIOS administrator and user passwords can be set here

Boot – Set boot priorities and configurations.

Save & Exit –Save your changes and exit system setup.

Summary of Contents for Aaeon VPC-3350S

























































































Search results

Summary of Contents for Aaeon VPC-3350S

Reviews:

Related manuals for Aaeon VPC-3350S

Brands by name

Popular brands

Asus Aaeon VPC-3350S, User Manual

Search results

Summary of Contents for Aaeon VPC-3350S

Reviews:

Related manuals for Aaeon VPC-3350S

Brands by name

Popular brands