ASUS A7V-VM User’s Manual
21
Connectors
2. H/W SETUP
2. HARDWARE SETUP
A7V-VM System Panel Connectors
IDELED-
+5V
Speaker
Speaker
Connector
Power LED
Ground
Reset SW
IDELED
ExtSMI#
Reset
Ground
ATX Power
Switch*
PWRBTN
Ground
PWRLED-
PWRLEDB-
MSGLED-
Ground
SMI Lead
*
Requires an ATX power supply.
Message LED
A7V-VM
21) IDE Activity LED (2-pin IDELED)
This connector supplies power to the cabinet’s IDE activity LED. Read and
write activity by devices connected to the Primary or Secondary IDE connector
will cause the LED to light up.
22) ATX Power Switch Lead (2-pin PWR)
The system power is controlled by a momentary switch connected to this lead.
Pressing the button once will switch the system between ON and SOFT OFF.
Pushing the switch while in the ON mode for more than 4 seconds will turn the
system off. The system power LED shows the status of the system’s power.
