Asus 90SF00H1-M00080 Manual Download Page 117

Page: 117 / 186

5-25

ASUS ESC8000 G4

5.5.9

Network Stack Configuration

Allows you to configure the network stack configuration.

Network Stack [Disabled]

Allows you to enable or disable UEFI Network Stack.

Configuration options: [Disabled] [Enabled]

The following items appear only when you set the

Network Stack

[Enabled]

Ipv4 PXE Support [Disabled]

Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will

not be created.

Configuration options: [Disable] [Enable]

Ipv4 HTTP Support [Disabled]

Enables or disables the Ipv4 HTTP Boot Support. If disabled, Ipv4 PXE boot option will

not be created.

Configuration options: [Disable] [Enable]

Ipv6 PXE Support [Disabled]

Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will

not be created.

Configuration options: [Disable] [Enable]

Ipv6 HTTP Support [Disabled]

Enables or disables the Ipv6 HTTP Boot Support. If disabled, Ipv6 PXE boot option will

not be created.

Configuration options: [Disable] [Enable]

PXE boot wait time [0]

Set the wait time to press ESC key to abort the PXE boot. Use the <+> or <-> to adjust

the value. The values range from 0 to 5.

Media detect count [1]

Set the number of times presence of media will be checked. Use the <+> or <-> to

adjust the value. The values range from 1 to 50.

Summary of Contents for 90SF00H1-M00080



























































































































































































Search results

Summary of Contents for 90SF00H1-M00080

Reviews:

Asus 90SF00H1-M00080, Manual, Page: 117 / 186

Search results

Summary of Contents for 90SF00H1-M00080

Reviews: