Asus 90IG0401-BU9000 User Manual Download Page 92

Page: 92 / 139

4.7.4 Restore/Save/Upload Setting

To restore/save/upload wireless router settings:

1. From the navigation panel, go to

Advanced Settings

Administration

Restore/Save/Upload Setting

tab.

2. Select the tasks that you want to do:

• To restore to the default factory settings, click

Restore

, and

click

in the confirmation message.

• To save the current system settings, click

Save

, navigate to

the folder where you intend to save the file and click

Save

• To restore from a saved system settings file, click

Browse

locate your file, then click

Upload

NOTE:

If issues occur, upload the latest firmware version and configure

new settings. Do not restore the router to its default settings.

Summary of Contents for 90IG0401-BU9000












































































































































Search results

Summary of Contents for 90IG0401-BU9000

Reviews:

Related manuals for 90IG0401-BU9000

Brands by name

Popular brands

Asus 90IG0401-BU9000, User Manual

Search results

Summary of Contents for 90IG0401-BU9000

Reviews:

Related manuals for 90IG0401-BU9000

Brands by name

Popular brands