English
5
Preparing your modem
1. Unplug the power cable/DSL modem. If it has a battery
backup, remove the battery.
NOTE:
If you are using DSL for Internet, you
will need your username/password from your In-
ternet Service Provider (ISP) to properly configure
the router.
2. Connect your modem to the router with the bundled
network cable.
LINE
LAN
RESET
PWR
3. Power on your cable/DSL modem.
4. Check your cable/DSL modem LED lights to ensure the
connection is active.
Unplug
EEU13013_Blue_Cave_172x144mm_QSG.indb 5
2017/7/27 15:46:08
