Asus 4G-N12 User Manual Download Page 48

Page: 48 / 72

•

Port of Web Access from WAN

: Specify the port number

of the web server allowed to access the wireless router

settings.

3. Click

Apply

4.5.2 Firmware Upgrade

NOTE

: Download the latest firmware from the ASUS website at

http://www.asus.com

To upgrade the firmware:

1. From the navigation panel, go to

Advanced Settings

Administration

Firmware Upgrade

tab.

2. In the

New Firmware File

field, click

Browse

to locate the

downloaded file.

3. Click

Upload

NOTE

: When the upgrade process is complete, wait for some time for

the system to reboot.

4.5.3 Restore/Save/Upload Setting

To restore/save/upload wireless router settings:

1. From the navigation panel, go to

Advanced Settings

Administration

Restore/Save/Upload Setting

tab.

2. Select the tasks that you want to do:

• To restore to the default factory settings, click

Restore

, and

click

in the confirmation message.

• To save the current system settings, click

Save

, navigate to

the folder where you intend to save the file and click

Save

• To restore from a saved system settings file, click

Browse

locate your file, then click

Upload

If issues occur, upload the latest firmware version and configure new

settings. Do not restore the router to its default settings.

Summary of Contents for 4G-N12









































































Search results

Summary of Contents for 4G-N12

Reviews:

Related manuals for 4G-N12

Brands by name

Popular brands

Asus 4G-N12, User Manual

Search results

Summary of Contents for 4G-N12

Reviews:

Related manuals for 4G-N12

Brands by name

Popular brands