AstroNova TrojanLabel T3-OPX User Manual Download Page 25

Page: 25 / 98

T3-OPX installation

T3-OPX User Guide

Remove service tray plastic protectors

Remove the orange plastic protectors. These ensure the service tray does not shift position
during transportation.

Open the service door.

Remove the two plastic protectors.

Connect T3-OPX power supply cord and network cables

This procedure requires the power supply cord (with grounding) and network cable.

Warning:

Always use the supplied power supply cord connected to a grounded power outlet.

Connect the power supply cord to the printer power inlet.

See “Connectors” on page 16.

Connect the power supply cord plug to the power source outlet.

Connect the network cable to the network inlet.

Connect the MT1 or MT2 power supply cord

This procedure requires the power supply cord (with grounding).

Warning:

Always use the supplied power supply cord connected to a grounded power outlet.

Connect the power supply cord to the Mail Table power inlet.

Connect the power supply cord plug to the power source outlet.

Summary of Contents for TrojanLabel T3-OPX



































































































Search results

Summary of Contents for TrojanLabel T3-OPX

Reviews:

Related manuals for TrojanLabel T3-OPX

Brands by name

Popular brands

AstroNova TrojanLabel T3-OPX, User Manual

Search results

Summary of Contents for TrojanLabel T3-OPX

Reviews:

Related manuals for TrojanLabel T3-OPX

Brands by name

Popular brands