Printer Maintenance
QL-800 User Guide
87
Cleaning
Cleaning the Printer Exterior
Over time, the plastic exterior panels of the printer may accumulate dust, dirt, etc. You can
clean these panels as needed.
1
Dampen a clean, lint-free cloth with water.
2
Gently clean the plastic exterior surfaces using the cloth.
Anti-static electronic equipment cleaner may be used for exterior cleaning as needed.
Cleaning the Input Pinch Rollers
As media is fed into the printer, it is advanced by a series of rollers just inside the media entry
slot. Over time, these rollers may accumulate dust or adhesive residue. You can clean these
input pinch rollers as needed.
1
Remove media from the printer.
2
Power off the printer.
3
On the rear of the printer, turn the power inlet switch off.
4
Open the top cover.
5
Disconnect the roller cover plate [2] by removing the two screws [1]. Slide the plate
outward, and then up away from the printer. Removing the plate may require a small
amount of force because of the tight fit. Set the plate and screws aside.
[2]
[1]
[1]
Summary of Contents for QuickLabel QL800
