Getting Started
QL-850 User Guide
16
Installation Precautions
When installing the printer, observe the following precautions.
•
Imaging faults can result from dew condensation that occurs when the printer is moved
from a cold place to a warm place. Leave the unpacked printer as is for at least two hours
before installing it.
•
The printer is heavy and moving it requires two people. One person should lift the front
by the indicated lift point, while the other person should lift the back by the indicated lift
point. Do not lift the printer by the mandrel. Lift the front of the printer by the recessed
handle. Lift the rear of the printer by the flat area of the plastic frame above the mandrel.
Keep the printer level while lifting it.
•
The printer has rubber feet that help secure the printer and prevent accidental movement.
When moving the printer on the installation surface, apply slight upward lifting pressure.
Dragging the printer may result in damage to the rubber feet.
System Requirements
•
Windows® 10/8/7
•
Microsoft .NET Framework 4.0
•
350 MB free hard drive space
•
Internet connection for software download
•
One available USB 2.0 port for USB installation
or
network connectivity for network instal-
lation
Powering On
1.
Connect the power cable to the printer power inlet [1]. Connect the other end of the power
cable to the power source. Then turn on the power via the power inlet switch [2].
[1]
[2]
[3]
Summary of Contents for QuickLabel QL-850
Page 1: ...U S E R G U I D E...