QL-120 User Guide
164
8
Safety Warnings and Precautions
Before using this printer, please read this section thoroughly. Warnings to heed and important
matters are described here to prevent damage to the user and other persons.
Do not attempt to operate this printer in any way other than those mentioned in the User Guide.
Location
Make sure there is sufficient space around the printer.
Warning
•
Never place items on the printer such as a flower vase, potted plant, cosmetics, any liquid
filled container, or metal fasteners. If such items were to fall on the printer, this could
cause a fire, electrical shock, or damage to the printer.
•
The electrical contacts inside the printer become extremely hot during normal operation.
To avoid causing a fire, never store flammable substances like alcohol, thinner, etc. near
the printer.
Caution
Avoid using the printer in the following types of locations.
•
Where the printer is exposed to open air or high humidity. This could cause a fire, serious
electrical shock, or damage to the printer. Also, if the printer is carried into a warm room
on a cold day, this could cause condensation inside the printer. If this happens, allow the
printer to sit for at least 1 hour at room temperature to adapt to the ambient temperature
and humidity.
•
Never place the printer on a slanted or unstable stand or table. If the printer is dropped
or slides off, this could cause personal injury. Also, never place a heavy object on top of
the printer. If the object is dropped or falls, this could cause injury.
•
Never expose the printer to open air or dust. This could cause a fire, serious electrical
shock, or damage to the printer. Also, never locate the printer near a water faucet or in
any other location where it will be exposed to water. This could cause serious electrical
shock.
•
Never set up the printer in a location that is exposed to high humidity or large amounts of
dust, or exposed to direct sunlight, high temperature, or open flame. This could cause a
fire or electrical shock.
•
Use the printer in an environment where temperature and humidity are within the ranges
of 59°F to 86°F (15°C to 30°C) and 10 to 80% RH (with no condensation).
•
To ensure normal operation of the printer and avoid possible damage, never install the
printer near large office equipment or any other type of electrical device that emits a
strong magnetic field.
•
Never block the ventilation ports on the printer. A blocked ventilation port could cause
heat to build up inside the printer and cause a fire. Also, place the printer in an area where
you can disconnect the power cord immediately; keep the area around the power cord
connection free of obstacles. This allows you to unplug the power cord quickly in an
emergency.
Summary of Contents for QuickLabel Kiaro! QL-120
Page 1: ...U S E R G U I D E...
