ASTRO VG-870, Instruction Manual, Page: 69 / 499

Chapter 2 INDIVIDUAL FORMATS FOR VG CONTROL COMMANDS
55
(9) Pattern name
STX 1 byte 02H
TRDT 1 byte 10H
Type 1 byte
“0” = Name
“1” = TIM LIST
“2” = HDMI LIST
“3” = HDCP LIST
“4” = CEC
“5” = DDC_CI
“6” = EDID
“7” = EDID (HEX)
"8" = Image
"9" = OPT User
"10" = DP
"11" = DP (HEX)
"12"=SubTitle
“13”= HDMI-ARC
, 1 byte 2CH (Delimiter)
Position 1 byte
“0” = Center, “1” = L-T, “2” = L-B, “3” = R-T, “4” = R-B,
“5” = C-T, “6” = C-B
, 1 byte 2CH (Delimiter)
Font 1 byte
“0” = 5×7, “1” = 7×9, “2” = 16×16
, 1 byte 2CH (Delimiter)
Length 1 or 2 bytes
“1” to “20”
, 1 byte 2CH (Delimiter)
Format 1 byte
“0” = Program Program name
“1” = Program Pattern name
“2” = Program Program name
+ Pattern name
“3” = Program Program name + H/V period
+ Reso DotClock
, 1 byte 2CH (Delimiter)
String 20 bytes * 20 ASCII characters (When the string contains
fewer than 20 characters, enter a space or spaces
after the characters to bring the number of
characters up to 20)
, 1 byte 2CH (Delimiter)
Over Scan H 1 or 2 bytes
“1” to “20” (%)
, 1 byte 2CH (Delimiter)
Over Scan V 1 or 2 bytes
“1” to “20” (%)
, 1 byte 2CH
（
Delimiter
）
DP Block No 1 byte "0" to "7"
Fig. 2-14-10
(10) Color bar data
STX 1 byte 02H
TRDT 1 byte 10H
TYPE 1 byte
“0” = Custom (Refer to the color bar parameters)
“1” = 100/100-H
“2” = 100/75-H
“3” = 75/75-H
“4” = SMPTE
“5” = RGBW-V
“6” = xvYCC (4%)
“7” = xvYCC (8%)
“8” = xvYCC (12%)
, 1 byte 2CH (Delimiter)
MODE 1 byte
“0” = %, “1” = dot
, 1 byte 2CH (Delimiter)
Number of lines repeated 1 or 2 bytes
“0” to “16”
, 1 byte 2CH (Delimiter)
H width 1 to 4 bytes
% = “0” to “1000” (0.0 to 100.0%), dot = “1” to “9999”
, 1 byte 2CH (Delimiter)
V width 1 to 4 bytes
% = “0” to “1000” (0.0 to 100.0%), dot = “1” to “9999”
, 1 byte 2CH (Delimiter)
Direction H/V 1 byte
“0” = Horizontal, “1” = Vertical,
“2” = Repeated horizontally, “3” = Repeated vertically