ASTRO VG-870, Instruction Manual, Page: 457 / 499

Chapter 5 INDIVIDUAL DRAWING COMMAND FORMATS
443
5.14 GTRIPA [D2H]: Filled-in triangle drawing /
CTRIPA [D3H]: Filled-in triangle clearing
5.14.1 GTRIPA [D2H]: Filled-in triangle drawing
Function: This command draws a filled-in triangle on the graphic plane (1-bit plane).
The coordinates of the three apex points are set by the parameters.
Sequence: Type 2
Command:
STX 1 byte 02H
GTRIPA, CTRIPA 1 byte D2H, D3H
Coordinate X1 2 to 5 bytes
Sign code + “0” to “4095” e.g. 100  “0100”
Sign code: “0” = +, “1” = -
*-
2048 (“12048”) to +4096 (“04095”) in numerical
terms
Data delimiter 1 byte
“, “
Coordinate Y1 2 to 5 bytes
Sign code + “0” to “4095” e.g. 100  “0100”
Sign code: “0” = +, “1” = -
*-
2048 (“12048”) to +4096 (“04095”) in numerical
terms
Data delimiter 1 byte
“, “
Coordinate X2 2 to 5 bytes
Sign code + “0” to “4095” e.g. 100  “0100”
Sign code: “0” = +, “1” = -
*-
2048 (“12048”) to +4096 (“04095”) in numerical
terms
Data delimiter 1 byte
“, “
Coordinate Y2 2 to 5 bytes
Sign code + “0” to “4095” e.g. 100  “0100”
Sign code: “0” = +, “1” = -
*-
2048 (“12048”) to +4096 (“04095”) in numerical
terms
Data delimiter 1 byte
“, “
Coordinate X3 2 to 5 bytes
Sign code + “0” to “4095” e.g. 100

“0100”
Sign code: “0” = +, “1” = -
*-
2048 (“12048”) to +4096 (“04095”) in numerical
terms
Data delimiter 1 byte
“, “
Coordinate Y3 2 to 5 bytes
Sign code + “0” to “4095” e.g. 100  “0100”
Sign code: “0” = +, “1” = -
*-
2048 (“12048”) to +4096 (“04095”) in numerical
terms
ETX 1 byte 03H
Fig. 5-14-1