ASTRO VG-870, Instruction Manual, Page: 19 / 499

Chapter 1 CONCERNING THE TERMINAL COMMANDS
5
1.7 Error statuses
Error code Description
“00”
This error occurs when an attempt has been made to write data when the memory
card was not installed.
“01”
This error occurs when the program which was input is disabled when direct display
or a program was executed.
“02” This error occurs when the horizontal sync data is outside the 5.00 MHz ≤ Dot Clock
≤ 300.00 MHz range when direct display or a program was executed.
“03” This error occurs when the horizontal sync data is outside the H Period ≥ Hsync +
Hdisp (dot) range when direct display or a program was executed.
“04”
This error occurs when the horizontal
sync data is outside the H Period ≥ Hsync +
Hdisp (μs) range when direct display or a program was executed.
“05” This error occurs when the horizontal sync data is outside the H Period ≥ H
HDwidth (dot) range when direct display or a program was executed.
“06” This error occurs when the horizontal sync data is outside the H Period ≥ H
HDwidth (μs) range when direct display or a program was executed.
“16”
This error occurs when the correct data was not set in the output condition data.
“17”
This error occurs when the correct data was not set in the character pattern data.
“18”
This error occurs when the correct data was not set in the crosshatch pattern data.
“19”
This error occurs when the correct data was not set in the dot pattern data.
“20”
This error occurs when the correct data was not set in the circle pattern data.
“21”
This error occurs when the correct data was not set in the burst pattern data.
“22”
This error occurs when the correct data was not set in the window pattern data.
“23”
This error occurs when the correct data was not set in the color bar pattern data.
“24”
This error occurs when there is an error in a parameter.
“25”
This error occurs when there is an error in the data.
“26”
This error occurs when the sync signals have not been set.
“27”
There is an error in the video level and sync level data.
“30”
A timeout occurred during communication in the terminal mode.
“31”
An undefined command was received in the terminal mode.
“32”
A timeout occurred in vertical sync interrupt wait.
“33”
There is an error in the program number.
“34”
There is an error in the group number.
“35”
There is an error in the user character code.
“40”
The memory card has not been installed.
“43”
There is an error in the optional pattern number.
“44”
Trouble with FAT for optional patterns created by the user
“45”
Unregistered optional pattern created by the user
“46”
There is an error in the image data number.
“47”
Trouble with FAT for image data
“48”
The image data has not been registered.
“50”
The function cannot be used because the keys are locked.
“51”
The cursor pattern has not been selected.
“52”
Invalid EDID optional pattern
“56”
There is an error in the gray scale pattern data.
“57”
There is an error in the optional pattern data.
“59”
There is an error in the cursor pattern data.
“60”
There is an error in the program name data.
“61”
There is an error in the graphic color data.
“62”
There is an error in the action data.
“64”
Vtotal of the vertical timing data is outside the specified range.
“65”
Vdisp of the vertical timing data is outside the specified range.
“66”
Vsync of the vertical timing data is outside the specified range.
“67”
Vbackp of the vertical timing data is outside the specified range.
“68”
T
he front porch of the vertical timing data is outside the specified range. (Vtotal ≥
Vsync + Vdisp)