3 Specifications
3.1 Electrical
Voltage ------------------------------ 100, 115, 200 or 230 VAC (±10%)
single phase
Power Requirements -------------- LS10: 900 W (melt unit only: hoses/
---------------------------------------- LS20: 1400 W applicators not included)
Frequency--------------------------- 50/60 Hz
Main Circuit Breaker Rating----- All VAC: 15 A
Pump Motor Circuit -------------- 200/230 VAC:
0.5 A
Breaker Rating --------------------- 100/115 VAC:
1 A
Tank Overtemperature Thermostat
---------------------------------------- 205 °C (400 °F) (standard, other ratings
available)
Pump Warmup Thermostat------- 121 °C (250 °F) (standard, other ratings
---------------------------------------- available)
3.2 Physical
Tank Capacity---------------------- LS10: 4.5 kg (10 lb)
---------------------------------------- LS20: 9.1 kg (20 lb)
Hose Capacity---------------------- 2 manual hoses or 2 automatic hoses
Shipping Weight ------------------- LS10: 29.1 kg (64 lb)
---------------------------------------- LS20: 35.4 kg (78 lb)
Storage Temperature -------------- 0–60 °C (32–140 °F)
Pump Size -------------------------- V1-450: 7.4 CCD (0.450 CID)
---------------------------------------- V1-675: 11.1 CCD (0.675 CID)
Melt Grid --------------------------- LS10: optional
---------------------------------------- LS20: standard
3.3 Operating
Warmup Time---------------------- 30–45 minutes
Viscosity ---------------------------- Maximum 25,000 centipoise (cps)
Melt Rate --------------------------- LS10: 3.6 kg/hr (8 lb/hr) - without melt
grid
---------------------------------------- LS20: 9.1 kg/hr (20 lb/hr) - with melt
grid
Temperature Range---------------- 38 °C – 232 °C (100 °F – 450 °F)
3.4 Environmental
Ambient Air Temperature -------- 5–40 °C (41–104 °F)
Altitude------------------------------ Sea level up to 2 km (1.24 miles)
Humidity---------------------------- 30–95 R.H. (%)
6
LS10 and LS20 19600-121
Copyright 2010 Astro Packaging