Astro Machine AstroJet M2, Operator'S Manual, Page: 8 / 90

SECTION 1
GETTING ACQUAINTED
2
Rear View
1.
Auxiliary Receptacle
–
Plug Optional Receiving Tray/Stacker power cord here.
2.
Switch, Receptacle and Fuse
–
Plug in power cord here. Switch turns main power
ON/OFF. ( Use Control Panel LED Power switch to turn off machine for cleaning and
maintenance
). Fuse/Circuit Breaker protects Printer’s electronic circuits
.
3.
USB Port Connection
–
USB cable from computer attaches to Printer here.
4.
Network Connection
– Network cable plugs in here.
5.
Interface Port
–
Connects optional High Capacity Motorized Receiving Tray.
6.
Feed Rollers and Sheet Separators
–
Pull media into printing area and position for
optimum printing.
7.
Adjustable Media Guide
–
Adjusts to media length.
8.
Rear Side Media Guide
–
Adjusts to media width.
9.
Adjustable Side Guide
– All printing is registered against this Guide. It is adjustable
to fit different widths of media.
10.
Adjustable Media Supports
– Slide into place to support width of media used for a
particular job.
11.
Feeder Table
–
Load up to 5,000 sheets (10 reams). Raises and lowers with load.
Media feeds from top of stack.