Astro Machine AstroJet M2, Operator'S Manual, Page: 65 / 90

SECTION 4
MAINTENANCE
59
9. GENTLY push Service Station while
turning large Gear on right side of Print
Engine clockwise. Gear should engage
gear on Service Station Roller and pull it
in. Once Service Station starts moving,
stop turning gear.
10. Power up unit, then click
“Install Service Station”
in
Printer Toolbox to pull
Service Station in.
NOTE: Make sure wick hanging
below Service Station is inside
plastic trough in Ink Tank Station
to prevent ink seepage.
NOTE: Service Station should operate
smoothly. If it binds, chatters or grinds, reinstall
Service Station. Lubricate Side Tracks and
Guide if necessary.
11. Close Clamshell Cover.
Close Front Cover.
CAUTION
HOLD ONTO BOTH LATCHES
WHEN OPENING AND CLOSING
PRINT ENGINE CLAMSHELL TO
PREVENT DAMAGE.
DO NOT ALLOW CLAMSHELL TO
DROP OR SLAM CLOSED.