Astro Machine AstroJet M2, Operator'S Manual, Page: 55 / 90

SECTION 4
MAINTENANCE
49
Cleaning Ink Tank Contacts
When reinstalling or replacing Ink Tanks, Ink Level indicator in Toolbox may not refresh. This may be due
to a dirty Ink Tank Level Prism and/or QA Chip contacts on that Ink Tank(s). Clean contacts as follows:
1. Remove Ink Tank(s).
Open Toolbox. Click
“Replace Ink
Tanks” . Once
“Confirm”
window opens, it
is safe to remove Ink Tanks.
IMPORTANT: DO NOT press
“Continue” until after you have replaced
Ink Tank(s) and closed Ink Tank Latches.
2. Open Front Cover.
Release Ink Tank Latch(es)
[A].
Remove Ink Tank(s) [B] that did not refresh.
3. Clean Ink Level Prism [A] and QA Chip
contacts [B] with a clean, dry, lint-free cloth.
NOTE: You can dampen cloth with distilled
water to wipe Prism, but DO NOT get QA
Chip contacts wet.
4. Reinstall Ink Tank(s) ( labels up ),
latch Ink Tank Latch(es) and click
“Continue”
on Confirm screen, then
“Refresh Ink Levels”
on User
Interface screen.
5. Close Front Cover.