Astro Machine AstroJet M2, Operator'S Manual, Page: 28 / 90

SECTION 2
INSTALLING PRINTER
22
Install Printhead Cartridge
Printhead Cartridge is a delicate precision device. Handle with extreme care to avoid damage and issues
that could degrade print quality.
CAUTION

Use electrostatic discharge (ESD) protection when handling.

Hold Printhead Cartridge by handles ONLY.

DO NOT touch ink couplings, nozzle surface or electrical contacts.

DO NOT unpack Printhead Cartridge until Printer is ready for
installation. Once unwrapped, delay in installing Printhead can
compromise print quality due to dehydration.

DO NOT place an unwrapped Printhead on any surface before
installing. Protect Printhead from scratches, dust, fibers, dirt and other
contaminants at all times.
1. With Printer power ON, open Top Cover.
Press Printhead Latch Release Button
[1] .
Printer will run, then Latch will pop open [2] .
Remove Cap Protectors on Ink Nozzles [3] . Be
sure to open Latch fully to retract Ink Nozzles.
CAUTION
DO NOT PRY OR MANUALLY LIFT PRINTHEAD LATCH OR LATCH MAY BREAK.
ONLY OPEN LATCH USING RELEASE BUTTON ON PRINTER OR PRINTHEAD
RELEASE COMMAND IN PRINTER TOOLBOX.