Astro Machine AstroJet M2, Operator'S Manual, Page: 23 / 90

SECTION 2
INSTALLING PRINTER
17
8. Finished software installation. Do not check the
Print Test Page as Printer is not set up yet. You
can check “Set this printer as the default printer”
at this time. Click
“Finish”
.
9. Install Printer Software window.
Click
“Install Print Software”
again to install
software on another Printer, or click
“Exit”
to
close the CD.
Tip: To help distinguish between multiple M-Series Drivers on your system; open the
“Printers and
Faxes”
( Devices and Printers ) folder and rename the Printers. For example, rename a network-configured
printer
“M Series (Network-1)”
and a USB-configured printer
“M Series (USB)”
.
To open the “Toolbox” utility over an Ethernet (network) connection:
Click Start , All Programs , Memjet , M Series Driver , Toolbox .
If more than one copy of the M-Series Driver is installed,
you will have to choose which device you want the
Toolbox to connect to. To help choose the proper device,
you can identify the Printer(s) using the Hardware ID you
copied earlier or you can rename the Printer(s) as outlined
in the
Tip above.
Example:
M-Series Driver configured for USB: suggested name
“M Series (USB)”
M-Series Driver (Copy 1) configured for Network:
suggested name
“M Series (Network-1)”
.
M-Series Driver (Copy 2) configured for Network:
suggested name
“M Series (Network-2)”
.