Astro Machine AstroJet M2, Operator'S Manual, Page: 18 / 90

SECTION 2
INSTALLING PRINTER
12
Connecting Printer
Plugging in Printer
Plug power cord into receptacle [1] at rear of Printer. Internal power supply in
Printer is rated 115 to 240VAC, 50/60 Hz. Plug optional Receiving Tray/Stacker
(RTS) into auxiliary receptacle
[4] .
CAUTION
DO NOT USE AN ADAPTER PLUG OR EXTENSION CORD TO
CONNECT PRINTER TO WALL RECEPTACLE.
DO NOT USE OUTLETS CONTROLLED BY WALL SWITCHES.
DO NOT USE AN OUTLET THAT SHARES SAME CIRCUIT
WITH LARGE ELECTRICAL MACHINES OR APPLIANCES.
Connecting to Computer
Printer connects to computer through USB Port [2] .
Network Port [3] is provided when operating in a network environment.
See
“Network Connection Setup”
in
“Using Printer Toolbox”
section.
Turning Power ON and OFF
Powering Up Printer:
1. Press Main Power Switch on Rear Panel.
2. Press Power Button on Control Panel.
Powering Down Printer:
CAUTION
WHENEVER POWERING DOWN UNIT, ALWAYS:
1. PRESS POWER BUTTON ON CONTROL PANEL.
2. WAIT FOR PRINTER TO STOP PROCESSING.
3. THEN PRESS MAIN POWER SWITCH ON REAR PANEL.