Astro Machine AstroJet M2, Operator'S Manual

Page: 15 / 90

SECTION 2
INSTALLING PRINTER
9
SECTION 2 – Installing Printer
Contents of Packaging
1. M2 High Capacity Printer
2. Ink Tanks
– Cyan, Magenta, Yellow, Black, Black
3. Printhead Cartridge
4. AC Power Cord
5. USB Cable
6. Operator Manual
7. Driver Software CD
8. Caster Adjusting Wrench
Before using Printer:

Choose a location for Printer

Unpack and assemble Printer

Remove Service Station Transport Tab

Position and Level Printer

Plug in Printer and connect it to computer

Install Printer Driver

Install Ink Tanks

Install Printhead

Set up feed on Printer
Choose a Location
Position Printer on a level surface at least 9" from any walls. Use Bubble Gauge mounted on Print
Engine (
or a small level ) to make sure Printer is level. See
“Leveling Printer”
on next page. Protect
Printer from excessive heat, dust, and moisture. Avoid placing it in direct sunlight.
Unpacking and Setup
Remove Printer and parts from carton. Remove all packing tape. Screws that attach various parts of the
guides to Printer are under the tape in their respective mounting positions.