www.Astria.US.com
126634-01A
11
FIREBRICK WALL INSTALLATION
IMPORTANT: Installation of brick
should be done after the fire
-
place is placed in a permanent
location.
1. The fireplace is shipped with the hearth
preinstalled. It is held in place for ship
-
ping with 3 shipping brackets (Figure 19).
Remove these brackets before installing
any of the other firebrick walls.
Figure 19 - Removing Shipping Brackets
Shipping
Brackets
2. Install the left and right firebrick walls.
There is a bracket with 2 tabs on the
bottom of each firebrick wall. Angle the
wall into the fireplace opening and into
the slots on the side of the hearth (Figure
20), then tilt the top of the panel toward
the firebox surround.
Hearth
Right Face
Slot
Figure 20 - Slots for Firebrick Walls
3. Secure the firebrick wall using two of the
side retaining brackets provided. The
bracket will slip underneath the metal lip
on the top of the wall and screw into the
inner dome of the fireplace (Figure 21).
Figure 21 - Installing Side Walls
Retaining
Bracket
Right Wall
4. Install the bottom rear firebrick wall. Place
the wall face side down on the hearth with
the bottom of the wall toward the rear of
the firebox and the top toward the front
of the fireplace. Tilt the wall up toward
the back of the firebox. Secure bracket at
top of the firebrick wall to the rear firebox
surround (Figure 22).
Leading
Bricks
Figure 22 - Installing Bottom Rear Wall
Top
Bracket