Astria.US.com
126823-01C
27
Figure 67 - Placement of Glowing Embers (shown with Platinum Bright Embers)
Figure 66 - Platinum Bright Embers
Flat Front Burner
Ember Material
Glowing Embers (rockwool)
EMBER PLACEMENT
WARNING: Do not operate unit
without ember material correctly
in place as shown in Figures 66
and 67. Do NOT place ember ma-
terial anywhere else on the unit.
Use only ember material supplied
with unit. Excessive or incorrectly
placed ember material may pro-
duce carbon monoxide or soot. If
replacement embers are needed,
the replacement embers must be
purchased from IHP. See Page 45
for part numbers.
1. Two ember materials are supplied with
this log set. Platinum Bright Embers give
a bright glow appearing as hot coals.
Should embers need replacing, see
Parts
,
Page 44
.
Platinum Bright Ember placement.
Add
embers to front,
fl
at burner. Gently remove
embers from bag. Separate pieces of
ember material and place on surface of
fl
at burner just behind horizontal ports as
shown in
Figure 66
.
Glowing Embers placement.
Place
Glowing Embers material on front
fl
at
burner in areas away from ports as shown
in
Figure 67
.
2. Add volcanic stone and small decorative
logs around base of heater if desired.
DO NOT place rock or additional logs
on front burner or on logs.
Placing any
material on unit other than ember material
on front burner may result in production
of carbon monoxide or soot.
INSTALLATION
Continued
WARNING: Do not use any other
ember material not supplied with
this unit.
