manualshive.com logo in svg

Astrapool Dual Pure 100, Manual, Page: 1 / 20

Share
Download
Astrapool Dual Pure 100 Manual Download Page 1

 

 

ENGLISH 

 

 

1 

Número de revisión

 Rev 001-2013-08-06 

SOMMAIRE – CONTENTS – SUMARIO – SOMMARIO 

SUMARIO – INHALTSVERZEICHNIS 

 

 

TECHNICAL SPECIFICATIONS AND GENERAL INFORMATION .................................................................. 2

 

INSTALLATION IN THE TECHNICAL AREA ................................................................................................. 3

 

INSTALLATION OF THE CHAMBER: .......................................................................................................... 4

 

PROBE: ..................................................................................................................................................... 5

 

FLOW SWITCH: ........................................................................................................................................ 5

 

INSTALLATION OF THE EARTH ELECTRODE: ............................................................................................ 6

 

ELECTRICAL CONNECTIONS: .................................................................................................................... 7

 

SERVO-CONTROLLED BY THE COVER ....................................................................................................... 8

 

OPERATING THE ELECTROLYSER .............................................................................................................. 9

 

RECOMMENDATIONS ............................................................................................................................ 10

 

SWITCHING ON THE ELECTROLYSER ...................................................................................................... 10

 

ADJUSTING CHLORINE PRODUCTION .................................................................................................... 11

 

CHLORINE ANALYSIS METHOD .............................................................................................................. 11

 

INDOOR POOL OR POOLS WITH COVERS .............................................................................................. 11

 

ADJUSTING THE DURATION OF THE POLARITY INVERSION .................................................................. 12

 

CHECKS AND MAINTENANCE ................................................................................................................ 12

 

NON-MODIFIABLE PARAMETERS: ......................................................................................................... 13

 

INDICATORS ........................................................................................................................................... 15

 

pH REGULATION .................................................................................................................................... 16

 

SWITCHING ON FOR THE FIRST TIME .................................................................................................... 17

 

TIPS FOR THE CORRECT USE OF THE pH REGULATOR ........................................................................... 18

 

TAYLOR SCALE ....................................................................................................................................... 19

 

WARRANTY ............................................................................................................................................ 19

 

 

 

 

 

 

Summary of Contents for Dual Pure 100





















Reviews:

No comments