Astra Dialog 4223 User Manual Download Page 22

Page: 22 / 92

Using the display and operating elements

eud-1399/1.0 – R1.1 – 07.2011

Menu-guided navigation

Accessing the menu

The phone is in standby mode:

Undoing actions

To cancel operating steps, proceed as follows:

Resetting activated features

You can deactivate again all the activated functions (e.g. Forwarding, Barring).

Menu

Press the

Menu

softkey.

➔

Menu entries are displayed.

Scroll through the menu entries with the

softkey.

Press the setting you want.

➔

Accessing the displayed menu.

<long>

End input without saving:

Press and hold down the Correction key.

Back to the idle state in the menu:

Press the Correction key.

Press the Info key.

➔

All the activated functions are now displayed.

Reset

the function in question.

➔

The function is now deactivated.

Summary of Contents for Dialog 4223





























































































Search results

Summary of Contents for Dialog 4223

Reviews:

Brands by name

Popular brands

Astra Dialog 4223, User Manual

Search results

Summary of Contents for Dialog 4223

Reviews:

Brands by name

Popular brands