Astoria futura +4U, User Manual

Page: 40 / 136

40
User manual
9.2 Programming hot water doses
To program the hot water doses, proceed as fol-
lows:
t
insert the prog. smart card into the programming
reader (
7 ) as indicated in the drawing ;
t place the cup under the hot water nozzle;
t
press and hold down the "
PROG/STOP
" key on
the left push-button panel until all dose key LEDs
switch on;
t
press the hot water delivery key ;
t
when the desired dose has been reached, confirm
by pressing the hot water key
again;
t repeat the operation for the other dose button;
t when finished programming, press the key
“
PROG/STOP
” and remove the smart card from
the reader ( 7 ).
9
Programming doses
9.1 Programming coffee doses
To program the dose keys, proceed as follows:
t
insert the prog. smart card into the programming
reader (
7 ) as indicated in the drawing;
t
press and hold the “
PROG/STOP
” key down for
5 seconds: the LED of the “
PROG/STOP
” key will
flash and all keys on the push-button panel being
programmed will turn on;
t
fill the filter with a dose of ground coffee and
press it with the coffee press;
t
attach the portafilter to the delivery group;
t
put the coffee cup under the dispensing spout;
t
press the desired dose key (e.g.: “ 1 Espresso” );
t
wait for delivery;
t
to confirm the desired dose press again the dose
key or the "
PROG/STOP
" key;
t
once the dose is confirmed, the LED of the pro-
grammed key switches off and only the keys yet
to be set remain on;
t
repeat this operation for the other dose but-
tons;
t when finished programming, press the key
“
PROG/STOP
” until all LEDs go off on the push
button panel and remove the smart card from
the reader (
7 ).
i
After 30 seconds of idle time, the machine
will automatically exit the dose programming
mode, confirming the already programmed
ones.
i
All models are provided with 2 keys for the
dispensing of hot water. These can be pro-
grammed individually and supply doses which
are independent from one another.
i
The 4GR version has 2 hot water nozzles. The
left key controls the left hot water nozzle,
while the right key controls the right hot water
nozzle.
i
The programming of each dose must be carried
out with ground coffee and not with previously
used coffee grounds.
i
It is possible to program all the push-button
panels of the machine simultaneously using
only the left push-button panel. To obtain dif-
ferent doses for the various groups, perform the
programming by starting with the left push-
button panel and then all the others.
7
PROG.