ASTi Telestra Target Operations & Maintenance Manual (Ver. 2, Rev. M)
18
Copyright © 2020 Advanced Simulation Technology inc.
5.3. Testing the HLA Software
5.3.1. Host Emulation Utility
The host emulation program (
hostemu
) that is shipped with the HLA software allows the user to
test the remote interface and verify that it is working correctly. To run the host emulator on the
local platform, log in as “
hlauser
.”
hostemu <port number>
To connect to a port on a remote Target, type the command:
hostemu <port number> <IP address>
where the
<
IP address
>
parameter specifies the IP address of the remote Target. This
command allows a local Target to act as a remote host to a second Target.
Once attached,
hostemu
acts as a console. Typed text is sent to the Target remote control
interface, and the replies are displayed on the screen.
