Asterisk AsReader ASR-023B, Setup Manual, Page: 18 / 70

ASR-023B Scan Module Setup Manual
ASTERISK, INC. 17
4
Output and Prompt
4.1. Transmit “No Read” Message
Enable this option to transmit “NR” if a symbol does not decode during the timeout
period. Any enabled prefix or suffixes are appended around this message.
When disabled, and a symbol cannot be decoded, no message is sent to the host.
Note: After enabling the "No read" prompt function, this function will not take effect
until a barcode has been successfully scanned.
*Disable no read
Enable no read