Asterisk AsReader ASR-023B, Setup Manual, Page: 12 / 70

ASR-023B Scan Module Setup Manual
ASTERISK, INC. 11
2.3.2. Sensitivity Level
Sensitivity can be set for automatic induction mode. There are three levels of
sensitivity to choose from, Default: High.
*High
Middle
Low
2.4. Duration in Scanning
This parameter sets the maximum time decode processing continues during a scan
attempt. It is programmable in 0.1 second increments from 0.50 to 25.5 seconds.
To set a duration in scanning, scan the barcode below. Next scan three Numeric
Barcodes in appendix that correspond to the desired-on time. Single digit numbers
must have a leading zero. For example, to set an on time of 0.5 seconds, scan the
barcode below, then scan the "0", "0" and "5" barcodes; to set an on time of 10.5
seconds, scan the barcode below, then scan the "1", "0" and "5" barcodes. To change
the selection or cancel an incorrect entry, scan Cancel in appendix .