Associated Electrics 80939, Manual & Catalog

Page: 17 / 34

17
:: :: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 5 Rear End Build - Bag 7.1, 7.2, 7.3 - Step 5
:: :: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 6 Rear End Build - Bag 7.1, 7.2, 7.3 - Step 6
:: :: Rear End Build - Bag 7.1, 7.2, 7.3 - Step 4 Rear End Build - Bag 7.1, 7.2, 7.3 - Step 4
81060
Hinge
Pin
81446
Suspension
Arm Shim
x2 x2
Kit Setup:
25225
3x3mm
Set Screw
31521
2.5x8mm
BHCS
x2 x2
x2 x2
81257
3x6mm
Set Screw
x2 x2
Tighten 3x6mm set screws just enough to
still allow the anti-roll bar to move freely.
!
#1596
thread lock
#1596
thread lock
Center the anti-roll
bar collet on the anti-
roll bar, then tighten
the 3x3mm set
screw.
Rear Anti-Roll
Bar Gap: 0mm
!
!
#1596
thread lock
25225
3x3mm
Set Screw
81150
Anti-Roll
Bar
Collet
81140
(Rear) Anti-Roll
Bar, 2.7mm
81150
Anti-Roll
Bar Pivot
81150
Anti-Roll
Bar Rod
End
81150
Rod End
Ball
81258
3x12mm
Set Screw
x2 x2
0mm
Left Side Right Side
Anti-Roll Bar Pivots:
Offset the anti-roll bar
rod ends
(approximately 45 degrees).
!
81260
4x14mm
BHCS
81455
Arm Mount,
HRC, Narrow
(D)
x2 x2
81050
Arm Mount
Insert,
Center
x2 x2
81197
Shock
Pin
81257
3x6mm
Set Screw
x2 x2
x2 x2
(not included)
(not included)