Assistant Midi 32
Module board for Midi2Org_32
User manual
Préamble
The module board "Midi 32 Assistant" is intended to be connected to a
Orgautomatech Midi2Org_32 midi board, version 3.5 and later. It comes with the
ribbon cable for the connection,
This module allows to "drive" the Midi board 32 and in particular to verify the
operation of all the coils connected to the outputs, facilitating the tuning of pipes, test
pneumatic valves, etc ...
You can install it permanently on your organ at your fingertips, it will be useful very
often.
