background image

Mamba Mount 

The

Universal Console Side Mount

WARNING: 

Do not install or use this product in any manner which would interfere with any of the ve-

hicles controls, air bags or safety devices. Do not install or use this product in any manner 

which causes a safety hazard for vehicle and/or occupants. 

To avoid serious injury do not place this device or any objects between the air bags and yourself 

or any passengers.

 

We recommend that you do not operate a computer while driving! 

Park safely, then use.  Remember, driving safely comes first.

WARNING:  

Make sure of and check on a regular basis that all knobs, fastening devices and handles are 

tight and secure.  Repair or replace any faulty or worn parts.  All equipment, such as computers, 

printers, phones, etc. must be safely secured when vehicle is in motion.

DISCLAIMER:  

The manufacturer of this product may not be held liable for any accidents, injuries or problems 

caused by the use or installation of this product.

Specifications subject to change without notice.

Installation Instructions

425-0150

Summary of Contents for Jotto Desk Mamba Mount

Page 1: ...recommend that you do not operate a computer while driving Park safely then use Remember driving safely comes first WARNING Make sure of and check on a regular basis that all knobs fastening devices and handles are tight and secure Repair or replace any faulty or worn parts All equipment such as computers printers phones etc must be safely secured when vehicle is in motion DISCLAIMER The manufactu...

Page 2: ...e console 2 Insert the provided 20 Hex Bolts and Washers from the inside of the console Tighten securely with ratchet INSTALLATION PROCEDURE READ INSTRUCTIONS BEFORE BEGINNING INSTALLATION TOOLS NEEDED 7 16 wrench or 1 4 drive ratchet with 7 16 socket PARTS INCLUDED Hardware Bag with necessary nuts bolts etc ...

Page 3: ...mount A MOD Desktop docking equipment to the top plate via holes and slots from the underside with provided 20 bolts and washers 4 The swivel tension to the Motion Arm and Tilt Swivel Assembly is set at the factory This can be adjusted by loosening and or tightening the 3 20 nuts at each location Use a 7 16 wrench to stabalize the nut and a 5 32 T handle hex key to turn the bolt ATTACH A MOD Botto...

Page 4: ...fications subject to change without notice Model 450 0449 The Screen Support is designed to keep your screen in place while you use your computer It attaches directly to the A MOD Desktop and adjusts in height and tilt angle RATCHET CLAMP OPERATION To adjust tilt pull handle out B and rotate counter clockwise A release and tighten If needed use 1 8 hex head wrench for adjustment C Ratchet handles ...

Reviews: