7
Fitting Internal Furniture
Remove the two small M4 screw located under the
panel. Then remove the rubber gasket and metal plate
of Inside Panel.
Pass the cable through the inside rubber gasket,
then tighten M4 machined screw across metal plate
and rubber gasket with outside panel.
Ver1.03
Internal
Furniture
M4 Screw holes
Gasket
Remove the two small M4 screw located under the
panel. Then remove the rubber gasket and metal plate
of Inside Panel.
Pass the cable through the inside rubber gasket,
then tighten M4 machined screw across metal plate
and rubber gasket with outside panel.
Ver1.03
Internal
Furniture
M4 Screw holes
Gasket
Remove the two small M4 screw located under the
panel. Then remove the rubber gasket and metal plate
of Inside Panel.
Pass the cable through the inside rubber gasket,
then tighten M4 machined screw across metal plate
and rubber gasket with outside panel.
Ver1.03
Internal
Furniture
M4 Screw holes
Gasket
1. Remove Mounting Plate
2. Fix Mounting Plate
•
Remove the two short M4 screws on the
bottom of the Internal Furniture.
•
Next, remove the Mounting Plate leaving the
gasket attached.
•
Position two fingers in locations shown press
down on the Internal Furniture Cover to open
the Battery Cover. Rotate Cover 180 degrees
to expose mounting holes.
•
Pass the cable through the cutout in the
Gasket as shown.
•
Next, line up the Mounting Plate with screw
posts from External Furniture and install the two
long M4 machine screws in the positions shown.
NOTE:
Images shown for right-handed application, for left-
handed installations the upper M4 Screw will install into
adjacent hole in Mounting Plate.
