background image

External Siren
(SR-BX-ZW)

smart

Living

For more information on this product  

and Yale Smart Living Range visit  

www.yale.co.uk/smart-living

Consumer Support:

 [email protected]

2

The 2 year guarantee for this 

product is active from the date 
of purchase (A copy of this 
guarantee is available on our 
website).

Description

SR-BX-ZW is a Z-Wave External Siren that can 

connect to compatible Z-Wave enabled networks. 

It is capable of sounding an alarm upon receiving 

an alarm signal from the controller in the Z-Wave 

network when an alarm is activated. When 

triggered, the Siren will sound and the LED  

strobe will flash to attract attention.

Power Supply

The Siren is powered by 4x D-cell Alkaline batteries. 

On the right hand side of the PC board it has a 

power switch to turn the batteries ON or OFF.

The Siren can also be powered using an optional 9V 

1A power adaptor (via 9V power input). When wired, 

the Siren will primarily draw power from the 9V 

power adaptor and the batteries will act as a backup 

power source in the event of a power cut. The battery 

ON/OFF switch does not effect the 9V power adaptor.

Under battery only operation (without 9V power 

supply), the Siren will report the battery level (100%, 

75%, 50%, 25%, 10%, 0%) and low battery condition 

(when power drops below 10%). This indicates that 

the Siren has less than 1 month of standby power 

before the batteries are exhausted. The Siren will also 

beep five times when arming/disarming to indicate low 

battery condition.

Note: When changing batteries, press the learn button 

a few times to fully discharge before inserting new 

batteries.

Front 
Screw

Front View

Back View

Inside View

Mounting
Screw

Mounting
Screw

Mounting
Screw

Mounting
Screw

Mounting
Screw

Wall  

Tamper

Learn
Button

Front

Cover

Tamper

9V Power 

Input

(-) (+)

LED 1 LED 2

LED 3

Battery 

Power 

Switch

Battery

Compartment

1

Summary of Contents for Yale SR-BX-ZW

Page 1: ...so be powered using an optional 9V 1A power adaptor via 9V power input When wired the Siren will primarily draw power from the 9V power adaptor and the batteries will act as a backup power source in the event of a power cut The battery ON OFF switch does not effect the 9V power adaptor Under battery only operation without 9V power supply the Siren will report the battery level 100 75 50 25 10 0 an...

Page 2: ...r to the Z Wave controller manual on delete procedures The Siren is now ready to be added to a new Z Wave controller Installing The Siren There are two tamper springs on the Siren one pushing against the wall and one pushing against the front cover If the Siren is pulled off from the wall and or separated from the front cover the alarm will be activated Please ensure that both springs are fully de...

Page 3: ...ion for details Functionality may vary depending on the controller Alarm Activation When an alarm is activated the Siren will sound and flash according to the different alarm type Burglar and Emergency alarm Continuous alarm all LED s flash Fire alarm 2 second alarm with1 second interval all LED s flash Alarm Length Setting When the Siren receives an alarm signal via the Z Wave network it will act...

Page 4: ...CC Security Z Wave s Groups Association Command Class Version 2 Z WAVE S GROUPS ASSOCIATION COMMAND CLASS VERSION 2 SR BX ZW can be set to send reports to associated Z Wave devices It supports three association groups Group 1 for LifeLine maximum node 1 Battery CC COMMAND_CLASS_BATTERY Notification CC V4 COMMAND_CLASS_NOTIFICATION SwitchBinary CC V1 COMMAND_CLASS_SWITCH_ BINARY Device Reset Locall...

Reviews: