P/No. YSL-5121 04/18
RIGHT - HAND DOOR
LEFT - HAND DOOR
OUTSIDE
DOOR OPENING
IN
OUTSIDE
DOOR OPENING
OUT
OUTSIDE
DOOR OPENING
OUT
OUTSIDE
DOOR OPENING
IN
1
4
2
SETTING LOCK STATUS
SETTING LOCK STATUS
HAND OF DOOR ACCORDING TO ENGLISH PRACTICE
Determine hand of lock required from hand of door chart above.
Yale Simplicity Series Mortice Locks are mounted in accordance
with these instructions. Locks may or may not have cylinders,
lever handles or turn knob. Disregard instructions referring to the
features not required.
Important : Before drilling door, ensure correct hand is being installed.
NOTE: CASE DOES NOT need to be opened, to change HAND or
FUNCTION of LOCK.
HANDING OF LOCK
Determine hand of lock required from above hand of door chart.
Rotate bolt head to suit latching direction.
Ensure lock is in UNLOCKED position.
To UNLOCK (if required), using a small screwdriver, lever out Cylinder Hole
Plug where fitted and lift snib using the screwdriver.
SNIB
Rotation of the Snib hands the lock. With snib in unlocked position, use a
cylinder pin to rotate the snib if required.
ESCAPE Locks
The hole on the snib indicates the side lockable.
For left hand door the hole will be visible from the left of the lock.
For right hand door the hole will be visible from the back of the lock.
The escape side will have no holes on the snib.
Establish which side the adaptor is to be located, lever out Cylinder hole plug
where fitted.
PUT LOCK IN LOCKED POSITION, as shown in Step 1.
Insert Adaptor into lock body with TOP of Turn Knob Cam point away from front
of lock body.
Ensure Turn Knob Cam is engaged in yoke of snib as shown.
Place retainer pin through front plate to retain adaptor to lock. Ensure pin is
flush with front plate
LOCKABLE
LOCKABLE
ESCAPE
ESCAPE LEFT HAND DOOR
ESCAPE
TURN KNOB ADAPTORS
UNLOCKED
(Snib up)
LOCKED
(Snib down)
Yale
®
MOUNTING INSTRUCTIONS
SIMPLICITY MORTICE LOCK
ESCAPE RIGHT HAND DOOR
STANDARD TURN KNOB ADAPTORS
3
ANTI-LOCKOUT TURN KNOB ADAPTORS
4
Establish which side the adaptor is to be located, lever out Cylinder hole plug
where fitted.
PUT LOCK IN LOCKED POSITION, as shown in Step 1.
Align Adaptor cam so that it points up towards the top of the lock front plat, and
Place retainer pin through front plate to retain adaptor to lock. Ensure pin is
flush with front plate.
L
L
YOKE
TURN KNOB CAM
Anti-lockout is achievable via an anti-lockout adaptor. Ensure the lock is
unlocked and that the leg of the adaptor is installed behind the bolt frame.
The adaptors are handed. Ensure that the correct adaptor is installed.
1 HOLE - 20mm DIA. FOR SPINDLE
1 HOLE - 20mm DIA. FOR SPINDLE
2 HOLES - 20mm DIA. SL
OT FOR CYLINDER
2 HOLES - 20mm DIA. SL
OT FOR CYLINDER
2 HOLES - Ø6.5mm
2 HOLES - Ø6.5mm
ENSURE LOCK IS REMOVED FROM MORTICE
BEFORE DRILLING HOLES.
TO PREVENT POSSIBLE DAMAGE TO DOOR FACE
DO NOT DRILL RIGHT THROUGH DOOR.
ENSURE LOCK IS REMO
VED FROM MORTICE
BEFORE DRILLING HOLES.
TO PREVENT POSSIBLE D
AMAGE T
O DOOR FACE
DO NOT DRILL RIGHT THROUGH DOOR.
Adaptor leg
insert into the lock. (Look from the other side to check engagement with snib)
1 HOLE - 20mm DIA.
FOR TURN
1 HOLE - 20mm DIA.
FOR TURN
