Description
1.
Learn/Test Button
To enter Test mode:
Press once in Standby
mode. The LED will light up for 2 seconds
whenever motion is detected. Test mode
lasts for 3 minutes.
2.
LED Indicator
3.
Knockouts for Wall/Corner Mounting
4.
Jumper 2 = Supervision Enable/Disable
5.
Jumper 3 = Motion High/Low Sensitivity
6.
Tamper Switch with spring
7.
3x 1.5V AAA Alkaline Batteries
8.
Cover securing screw
9.
Battery tab
Inside the Box
• 1 x PIR Motion Detector.
• 4 x wall plugs & screws.
• 3 x 1.5V AAA alkaline batteries (pre-fitted).
PIR Motion Detector
(EF-PIR)
smart
Living
For more information on this product
and Yale Smart Living Range visit
www.yale.co.uk/smart-living
Consumer Support:
2
The 2 year guarantee for this
product is active from the date
of purchase (A copy of this
guarantee is available on our
website).
ale
Y
Program your PIR before installation and test
afterwards. Please see your Alarm user manual.
• Mount in a position such that an intruder
would normally move across the PIRs field
of view.
• Height should be between 1.9 and 2 metres
above floor level.
• Location in a corner will ensure wider room
coverage.
• Do not mount the PIR where its field of view
will be obstructed e.g. by curtains, ornaments
etc.
• Do not point directly at sources of heat
e.g. fires or boilers, and do not position
directly above radiators.
• Avoid mounting the PIR directly facing a
window.
• Do not point the PIR at a door protected
by a Door/Window Contact.
1
2
8
4
5
6
7
3
3
9
Programming & Location
