16
P/N
-110-
-
-
Rev D
AYRD
STANDALONE INST FUL
Definitions
All Code Lockout Mode:
This feature is enabled by the Master code. When enabled, it restricts all user (except
Master)
code access. When attempting to enter a code while the unit is in Lockout, the keypad flashes 8
PIN
times and the lock beeps 3 times as well.
Audio Mode:
Disable (3)
Choosing
in Audio mode shuts off the code confirmation tone play-back for use in quiet
areas. Audio mode is enabled or disabled through feature programming by the Master code.
Automatic Re-lock Time:
After a successful unlock, the unit will automatically re-lock after thirty (30) seconds.
Low Battery:
When battery power is low, the Status Indicator flashes
. If battery power is completely lost,
RED
use the 9Volt battery override. To use the 9V battery override apply 9V battery, in either direction, to terminals
below the keypad for backup power option. Wake up the lock and enter your pin code to unlock the door.
Master
Code:
It must be created
PIN
The Master
code is used for programming and for feature settings.
PIN
prior to programming the lock.
The Master code will also operate (unlock/lock) the lock.
One Touch Locking:
When the latch is retracted, activating the keypad will extend the latch (during Automatic Re-
lock duration or when Automatic Re-lock is disabled).
Shutdown Time:
The unit will shut down (flashing keypad) for sixty (60) seconds and not allow operation after
the wrong code entry limit has been met.
Tamper Alert:
Audible alarm sounds if attempting to forcibly remove outside lock from door.
User
Code:
PIN
The User code operates the lock. Maximum number of user codes is 25.
Wrong Code Entry Limit:
After five (5) unsuccessful attempts at entering a valid
code, the unit will shut
PIN
down and not allow operation.
