Handing the Latchbolt
1. Insert flat blade screwdriver into cover slot.
2. Pull back on screwdriver until latchbolt
extends past base front and rotate the head
to the desired position.
Handing the Hubs
1. Locate RED MARK on locking piece.
2. Push toggle button slide away from "square
spindle hole".
3. With blade screw driver push RED MARK on
slide nearest "square spindle hole".
4. RED MARK indicates
locked side!
8800-ITS Mortise Lockset
Wiring Diagram and Installation Instructions
Attention Installer
If installation instructions are not followed this may result in
damage to the lock and void the factory warranty. Removing
cover screws voids lock body warranty.
Any retrofit or other field modification to a fire rated opening can
potentially impact the fire rating of the opening, and Yale Locks &
Hardware makes no representations or warranties concerning
what such impact may be in any specific situation. When
retrofitting any portion of an existing fire rated opening, or
specifying and installing a new fire-rated opening, please consult
with a code specialist or local code official (Authority Having
Jurisdiction) to ensure compliance with all applicable codes and
ratings.
An ASSA ABLOY Group brand
80-9086-0054-010 (07-14)
