V3.5 14/08/19
UD0089
Page 740
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
4.9.2
TOTAL SYSTEM FAILURE
In the event of total system failure you have two choices...
If you need to gain access to the keys quickly or you have a Mini Traka System the best way is to cut the security
seals that hold the keys to the iFobs.
Tools required...
Heavy duty wire cutters.
1.
Using the Master Key release the door (if fitted) using the Door Release Lock.
On a Mini Traka System you will need to use the Master Key to unlock the Pod Lock. The Control Panel is
hooked in at the bottom and locked at the top. Carefully begin to open the Control Panel. You will see the
lock at the bottom of the panel, using you finger release the Catch that hold the door shut.
2.
Using a heavy duty pair for wire cutters, cut the security seals that hold the keys to the iFobs.
3.
Please contact your supplier to have your Traka System repaired and tested.
If you have more time you will need to remove various parts of the Traka System to gain access to the
iFobs / Keys. Please refer to the Manual iFob Release Guide section for the relevant systems.
