Home
/
Assa Abloy
/
TRAKA32
/
User Manual

Assa Abloy TRAKA32, User Manual, Page: 663 / 919

Share

Page: 663 / 919

Assa Abloy TRAKA32 User Manual Download Page 663

V3.5 14/08/19

UD0089

Page 663

This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"

3.20.8.4.2

ADVANCED SEARCHING

Advanced Searching is similar to Standard Searching but allows you to search on more than one criterion and also
filters the list so that only records that have matching criteria are visible.

To enable the Advanced Searching feature, check the

Use Advanced Searching

option in the Properties window.

All the lists and reports within the Traka32 software can be searched upon all in the same way.

1.

At the top of each list or report there is a search menu...

2.

If you wish to search on a specific column simply select the column title from the drop down list. To search all
the visible columns select All Columns.

NOTE:

When using the option 'Advanced Search' you will not be able to select 'All Columns' when

searching for a user or a key.

3.

To search simply type in all or part of a word or number that you want to search on and press Enter or click
on the Search button.

For example if I want to search for Duncan...

All of the data that is visible in the list or report will be searched.

4.

If one or more matches are found the only the records with matching criteria will be visible.

5.

If no matches are found the following message will be displayed...

6.

Repeat step 3 to search on additional criteria. The search criteria are listed in the search menu.

7.

To clear the search, click on the Clear button.

«
...
661
662
663
664
665
...
»

Summary of Contents for TRAKA32
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments