Home
/
Assa Abloy
/
TRAKA32
/
User Manual

Assa Abloy TRAKA32, User Manual, Page: 642 / 919

Share

Page: 642 / 919

Assa Abloy TRAKA32 User Manual Download Page 642

V3.5 14/08/19

UD0089

Page 642

This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"

3.20.2

SETTING UP AUTO COMMS

This allows the automatic communication between the Traka system and the supporting Traka32 software. By
automatically communicating you ensure that the transactions recorded by the Traka system are always backed up to
the PC.

For automatic communication it is of course essential that the Traka32 software is running. In most applications only
one PC should be setup as online and this should be a PC that is not commonly used or switched off.

Traka also supports

Traka 32 as a Windows Service

(TAAS) which provides a means of running Traka32 in the

background as a Windows Service on an (unattended) PC. TAAS requires no User interface and keeps running even if
no-one logs on to the PC.

NOTE:

Auto Comms in Traka32 will not work if Traka as a Service is installed on the same PC, even if the

service is not running. Auto Comms will only work again once the service is uninstalled.

1.

Click on File, Properties.

2.

From the Properties window, click on the Comms section.

3.

Set the Auto Communication to Interval, Specific Times of Day, Online or Remote Host.

4.

Configure the related options...



Interval
By selecting interval you may specify how frequently, in minutes, that Traka32 should communicate
with the systems.

«
...
640
641
642
643
644
...
»

Summary of Contents for TRAKA32
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments