V3.5 14/08/19
UD0089
Page 261
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
Comms
Comms Fail Retry
Enter the number of time the software will attempt to wake a system in order to communicate before the
software gives up. If a system is being used or the door has been left open, the software will not be able to
communicate.
Network Delay
If you have a very busy Ethernet network, there may be a delay in the response times during the
communications. If you are finding that the software is timing out, increase the delay accordingly.
RS485 Delay
If you have a very busy RS485 network, there may be a delay in the response times during the
communications. If you are finding that the software is timing out, increase the delay accordingly.
Listening IP Port When Running as a Service
If you are running T.A.S (Traka as a service) you match this IP Port number to the IP Port number within the
T.A.S application to make a communication.
Auto Communication
This allows the automatic communication between the Traka system and the supporting Traka32 software.
By automatically communicating you ensure that the transactions recorded by the Traka system are always
backed up to the PC.
For automatic communication it is of course essential that the Traka32 software is running.
In most applications only one PC should setup as online and should be on a PC that is not commonly used or
switched off.
Off
The default is Off, which means that all communications must be manually completed using the
button.
