Securitron Magnalock Corp.
www.securitron.com
ASSA ABLOY, the global leader
Tel
800.624.5625
in door opening solutions
© Copyright, 2011, all rights reserved
PN# 500-22115
Page 1
Rev. C, 05/11
CONCEALED ELECTRICAL POWER TRANSFER SERIES CEPT
INSTALLATION INSTRUCTIONS
PRODUCT COMPATIBILITY NOTE: The Securitron CEPT will NOT operate properly on
openings with the following door/frame/hinge configurations:
Offset Pivots
Pocket Pivots
Center Hung Doors
Butt Hinges over 6”
Swing Clear Hinges
Balanced Doors
Available CEPT Models:
CEPT-10
Traditional Connect
10 Wire (2 + 8)
(2) Wire Nut
+ (8) Crimp
EL-CEPT
ElectroLynx®
(Assa Abloy)
12 Wire (8 + 4)
Connectors: 8 Pin + 4 Pin
CEPT-C5E
CAT 5e
(TIA/EIA-568-B Compatible)
9 Wire (8 + 1)
Connectors: 6 Pin + 4 Pin
DESCRIPTION
The Concealed Electrical Power Transfer CEPT unit is designed to provide a secure multiple wire
power and/or data transfer between a door frame and door. The unit mounts directly between
the frame and door along the hinged edge and is available in three multi-wire configurations.
The CEPT is non-handed, allows mechanical (hinged) movement of the door and is totally
concealed when the door is fully closed. This manual provides the information required to
successfully install a CEPT to a standard hinged door opening.
