Instructions for installing the 9700/12-9700
Surface Vertical Rod Exit Device
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477 or www.sargentlock.com
Top case
chassis
Center case
chassis
Bottom case
chassis
Bottom case
cover
Cross bar
Center
case cover
Top case
cover
Bracket
cover
Bracket
chassis
*NOTE: 12-9700 shown
CAUTION: CHECK BEFORE STARTING DOOR PREP
Door should be fitted and hung. Check box label for size of exit device, function, hand and design.
Surface of the door must be flush. Clear away
any raised projections to allow exit device to rest
on flat surface of the door.
1
THIS EXIT DEVICE IS NON-HANDED
Right hand
reverse bevel
Left hand
reverse bevel
OUT
Tools required
1.
Measuring tape
2.
Power drill
3.
Drill bits:
3/32", 1/4", 11/32", 3/8", #25
4.
Taps: #10-24
5.
Screwdrivers: Phillips #2 and #3
Top rod
Rod guide
Bottom rod
Rod guide
Cross bar plug
A5570G 5-5-09
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
