Copyright © 2013, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
ASSA ABLOY
80-9356-0005-020 (01-14)
9
Fail Secure / Fail Safe Electric Strike Wiring
Operation:
Door is normally closed and latched.
Activating switch will unlock the electric strike and the door will automatically
open. Door will close after hold open time delay has elapsed.
• For Fail Secure Strike
The door will remain
locked
during power failure.
• For Fail Safe Strike
The door will
unlock
during power failure.
JMP503
NC
NO
Radio Frequency Function Option
Notes:
1. Power input to Door Operator Unit is at
“T1” Power Input Terminal (not shown)
120VAC 60Hz.
2. Radio Frequency Feature can be
purchased as a separate kit and
installed as pictured below.
Operation:
Door is normally closed.
Activating wireless switch or hand held
wireless transmitter will open the door.
Door will close after hold open delay elapses.
Optional Door 2
Door 1
1
2
3
4
5
433MHz Receiver
(Mounted on Operator)
Wiring for Momentary
Hold Open Function
1
2
3
4
5
6
Signal input
Signal common
Relay output (K2)
Relay output (K1)
24 VDC (+)
24 VDC (-)
1
2
3
4
5
6
Signal input
Signal common
Relay output (K2)
Relay output (K1)
24 VDC (+)
24 VDC (-)
Jumper Settings
Place jumper to upper position
for normally closed (Fail Safe)
operation or to lower position
for normally open (Fail Secure)
operation.
3-5 Jumper wire
22ga or larger
copper wire only
(not provided)
RF Receiver
Unit
DC Electr
ic Str
ik
e
+
-
Wall Switch, Card Reader,
Key Switch, etc.
Normally Open Momentary
dry contacts
1
2
3
4
5
6
Signal input
Signal common
Relay output (K2)
Relay output (K1)
24 VDC (+)
24 VDC (-)