8
9
1
2
Prox Module
#6-32 Module Mounting Screws (for optional strike mount)
Reader/Antenna Body
Reader/Antenna Mounting Screws
Reader/Antenna Cover
1
2
3
4
5
6
7
24” Antenna Cable (connecting reader/antenna and Prox Module)
8
2 pin DPS & LBM Pigtail Connector
11
Dielectric Grease (apply to connections for humid applications)
10
4 pin 12V Strike Power Pigtail
8 pin Connector Prox Module Pigtail
RF0010: Prox Module
Installation Supplement
To be used when RF0010 is added to an electric strike
HES, Inc.
Phoenix, AZ
800-626-7590
The Prox Module can be supported by the
electrical connection to the electric strike, or
by mounting it directly to the back of some
models of HES electric strikes using the #6-32
module mounting screws. Do not attempt to
support the Prox Module with the 24”
antenna cable.
Access Control System
Control Panel and Power Supply
(By others)
Wiring Diagram
Dielectric
Grease
6
11
7
4
5
10
Door Position Sensor (DPS)
To Electric Strike
Power
8 Pin Connector (Prox Module) Pigtail
Red (+) Board Power
Black ( ) Board Power
Green Data 0
White Data 1
Yellow LED/Buzzer
Blue Not Used
Orange Not Used
Brown Not Used
-
10
2 pin Connector (Strike Module)
Tan Common
Pink Door Closed and Latch Engaged
8
4 Pin Connector (12V Strike Power)
Red (12VDC +) Strike Power
Black (−) Strike Power
9
9
To Electric Strike
LBM
12
12
DPS/LBM adapter
Prox Module Electrical Specifications
Operating Voltage
12VDC +/- 20%
Operating Current
125 mA Max @ 12VDC
Cable Detail
Distance to Host
500 ft Max
Recommended Type
18-24 AWG
(Dependent on distance) Stranded and shielded
Certifications
Compliance
FCC Part 15/IC Class B
Door Position Sensor (DPS)
Contact Rating
300ma @ 30VDC
Switch Type
Form A (SPST) Reed
www.hesinnovations.com
Prox Module credential specifications
Card reader
HID
®
13.56 MHz
Supported credential formats
Recognizes HID 26 - 39 bit formats
Supports HID 125 kHz credentials
Interfaces with any Weigand-compatible access
control system
3
