override
Present and hold a Master
Credential in front of the card
reader for 8 seconds
-Flashing Yellow LED's
Detach the Master Card
right after three beeps
d
a
c
Remove the Master Credential
from the front of the card reader
after hearing 3 short beeps
-Flashing Red LED's for 8 seconds
(Up to 20 Master Cards can be registered)
f
※
Registering Override Credentials can
only begin after completing Master
Credential programming
Change the Master Credential(s)
※
Important Note: Registration of Override Credentials
starts automatically at the end of Master Credential
programming mode
Present a credential to register as a Master Credential
- Note: The first credential presented will be registered
as a Master Credential
-Flashing Red LED's for 8 seconds followed by a long beep
a
b
※
Override Credentials can be used in Private Mode only
End of Master Credential programming mode
starts Override Credential programming mode
-Flashing Orange LED's for 8 seconds
Note: Skip this step if Override Credentials need
to be deleted or are not required
c
Present new Master Credential(s)
-Up to 20 Master Credentials can be registered
Present new Override Credential(s)
-(Up to 20 Override Credentials can be registered)
Present the same Master Credential 2x to end Master
Credential programming mode
-Flashing Red LED's for 8 seconds
Step 1 : Master Credentials
Present a User Credential
Present any registered Master Credential
-Flashing Yellow LED's for 8 seconds
b
e
h
Present a Master Credential
to delete existing user
credentials
Motor
noise
Touch for
8 secs
- During RED LED blinking
for 8 seconds
Beep-Beep
Beep-
Override Credential
programming mode
Present the last Master Credential 2x
to end Master Credential programming
mode
Sol-Do~
New Master Credential(s) successfully
registered
Beep-
Present and hold a Master
Credential in front of the card
reader for 8 seconds
-Flashing Yellow LED's
Remove the Master Credential
from the front of the card reader
after hearing 3 short beeps
a
c
Flashing Amber LED's for 8
seconds after short beep
f
b
e
-Wait for flashing Red LED's for 8
seconds before moving to next step
Present Override Credentials to
the front of the card reader to
register
Beep~
g
Present the last Override Credential
2x to end Override Credential
programming mode
New Override Credential(s) successfully
registered
Beep-
CLEAN
Sol-Do~
d
g
g
Present the
Master
Credential
h
j
j
override
Beep-
Sol-Do~
3-1
3-2
2
1
※
Present the last Master Credential 3x or wait 8 seconds
to end the Master Credential programming mode and
skip programming Override Credentials.
Precautions for Override Credentials
Present new User Credential(s)
-(Up to 20 User Credentials can be registered)
e
f
Present the same Override Credential 2x to end
Override Credential programming mode
Step 2 : Override Credentials
Step 3 : User Credentials
i
Public Mode
Private Mode
-Red LED blinks 3x followed
by a long beep
Step 1
Step 2
Step 3
Step 4
Step 5
Change the Override Credential(s)
Public Mode
Private Mode
Skip this step
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Present a Master
Credential to delete existing
user credentials
Public Mode
Private Mode
Skip this step
Flashing
for 8 secs
Flashing
for 8 secs
Sol-Do~
Flashing
for 8 secs
Flashes
3 times
Beep-Beep-Beep-
Beep-Beep-
Flashing
5 times
Flashes
5 times
Beep-Beep-Beep-
Beep-Beep-
Flashing
for 8 secs
Flashing
for 8 secs
Flashing
for 8 secs
Beep-Beep
Beep-
Sol-Do~
Flashing
for 8 secs
Flashing
for 8 secs
Flashes
for 8 secs
Touch for
8 secs
Motor
noise
Adding/Removing Credentials
Registering Credentials
※
Note: Override Credentials are programmed to provide
continuous access while the cabinet is in use.
※
Note: Skip this step if Override Credentials
need to be deleted or are not required
※
Clearly mark 1st Master Credential after initial
programming and keep in a safe place
※
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
※
This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
Document #3080006.014 Rev. 1
Short Beep - "Beep-"
Std. Beep - "Sol-Do~"
Long Beep - "Do-Mi-Sol~"
ELECTRONIC SECURITRY HARDWARE
HES | Securitron
assaabloyesh.com | 800.626.7590 | 10027 S. 51
st
Street Phoenix, AZ 85044 USA
