3000 Series Locks
FITTING INSTRUCTIONS
57
26
19
M
ax
im
um
ga
p
be
tw
ee
n
fa
ce
pla
te
&
st
rik
in
g
pla
te
no
t
to
ex
ce
ed
3m
m
,
w
ith
do
or
clo
se
d.
15
3
4
77
*26.5
*o10
22
11
3
Drill for
other handles
Drill for
ASSA round
rose handles
o20
(o25 for Escape Nightlatch,
Escape Sash Lock and
Escape Deadlock)
See note on front cover
(o25 for Funxion handles)
o7
Drill for DIN
Severe Duty
handles
Centre
line of
door
See note on front cover
Drill as required for handles to be used.
Drill holes for cylinder, handle spindle and handle
screws as appropriate for the products to be fitted.
*NOTE: On Bathroom lock only, drill holes in shaded
area instead of normal cylinder cut-out.
LOCKS WITH DIFFERENT INTERNAL AND EXTERNAL FUNCTIONS -
Single cylinder only (without thumbturn): Standard specification for 3069B,
3061, 3059 and 3062. On the OUTSIDE face of the door, drill and prepare oval
hole for cylinder fitting, ensuring hole does not pass beyond the centreline of the
door.
Half Set of Handles: Standard specification for 3069, 3069B, 3061, 3059 and
3062. On the INSIDE face of the door, drill a 25mm diameter hole for handle
spindle, ensuring hole does not pass beyond the centreline of the door.
Internal Status Indicator 3508: Standard specification for 3020.
On the INSIDE face of the door, drill a central 10mm diameter hole, ensuring hole
does not pass beyond the centreline of the door.
ASSA ABLOY Door Solutions, Units 3-4, ZK Park, 23 Commerce Way, Croydon, CR0 4ZS
Telephone: 020 8688 5191
CF2 10/07
On 44mm doors, fold along line and place around edge of door
15
38
30
*
o10
(When fitting 3020 with
3508 - Drill hole on
INSIDE FACE of door
only)
See note on front cover
*o6
*o7
TEMPLATE
