ASROCK Z790M-ITX WiFi, User Manual

Page: 43 / 55

39
Z790M-ITX WiFi
Addressable LED Header
(3-pin ADDR_LED1) (see p.6, No. 16)
This header is used to connect Addressable LED extension cable which allows users to
choose from various LED lighting effects.
Caution: Never install the Addressable LED cable in the wrong orientation; otherwise,
the cable may be damaged.
Z
7
9
0
M
-I
T
X
W
iF
i
1
Connect your Addressable RGB LED strips
to the
Addressable LED Header (ADDR_
LED1) on the motherboard.
ADDR_LED1
VOUT
DO_ADDR
GND
1
1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable may be
damaged.
2. Before installing or removing your RGB LED cable, please power off your system and
unplug the power cord from the power supply. Failure to do so may cause damages to
motherboard components.
1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports WS2812B addressable RGB LED strip (5V/Data/
GND), with a maximum power rating of 3A (5V) and length within 2 meters.